Talk me out of this
Hi,So as I said in the "Trial By Fire" topic, I've removed the skin off one side of my Penguin. I'm plotting what to do with this to improve on it, since it is so shoddy. Here's the side view:Here's...
View ArticleRe: Talk me out of this
Why do you want to use MDF? It swells, disintigrates and adds weight. Not a lot of strength either. I would go with regular framing lumber, kerf if you have to. If you will be keeping your little...
View ArticleRe: Talk me out of this
Hey Vik, You talked me out of the MDF. I'll go with solid lumber or plywood. Thanks! Your idea for front to back framing is exactly what I'm planning. The current walls are a non-issue as it's been...
View ArticleRe: Talk me out of this
Keep taking those pictures! We're all going to be watching and enjoying...VK
View ArticleRe: Talk me out of this
Agreed, if you are talking about the typical MDF found at the big box stores that is a definite no. There is a water resistant MDF product but it would make no sense to use that either, expensive and...
View ArticleRe: Talk me out of this
Greg,Thanks for your excellent points, I really appreciate it. I had a fleeting moment yesterday on the MDF, but thanks to you guys, I'm over it. Stiffer structure is what I was trying to say by...
View ArticleRe: Talk me out of this
I like Gregs points too.Actually I see nothing in those pictures that needs to be replaced or strengthened except the sill plate. Possibly some of the perimeter wood, but your close up shows that to...
View ArticleRe: Talk me out of this
JC wrote: I like Gregs points too.Actually I see nothing in those pictures that needs to be replaced or strengthened except the sill plate. Possibly some of the perimeter wood, but your close up shows...
View ArticleRe: Talk me out of this
Greg, Great thoughts!You have a good understanding of how and why.Increasing the thickness to 1/4" would certainly make it stiffer/stronger.Proper fastening is key, as you pointed out.The original...
View ArticleRe: Talk me out of this
Another few thoughts:Don't use too many fasteners. One more for good measure may be one too many. Like Rob said, proper placement and proper spacing is the key.Take a close look at the framing and...
View ArticleRe: Talk me out of this
Been gone for the weekend. These are great points!! Thanks so much for the input everyone. I'll let you know what I decide to do. JC
View ArticleRe: Talk me out of this
Anyone help me out on screw size for putting the framing together with my Kregg jig? Can I use those coated deck screws? I've got a place to get them for a good price, but I don't want to get the...
View ArticleRe: Talk me out of this
I posted this on your Trial By Fire posting when you asked there: You want 1 1/4" kreg screws for 3/4" thick wood. I used them for 1/2" thick too and the end came through on the other side but I cut...
View ArticleRe: Talk me out of this
In order for Kreg joints to work properly it is important to use Kreg screws. The flat bottom head and the drill point are a necessary feature to the system.
View ArticleRe: Talk me out of this
If anyone is considering a Kreg jig (I LOVE mine - don't know how I lived all those years without it), Woodcraft has the K3 Master System on sale for $139.99 and if ordered by May 29, they throw in...
View ArticleRe: Talk me out of this
Nancy, Thanks for re-answering the question and sorry for the redundancy. I'd forgotten about that other thread. Thanks everyone for the info. Justin
View Article
